Vertical blinds

Made to measure domestic and commercial blinds at Curtaincraft, Danehill, Sussex

 

Vertical blinds are made from stiffened fabric slats, usually available in 3 1/2" or 5" wide. They are probably the most efficient way of controlling light. Available in a large variety of colours and textures.

For help and advice on measuring, see our 'How to measure' guide or contact us for a free estimate.

The above photographed products are manufactured by
 

Silent Gliss logo

 

back to product range


Curtaincraft help and advice for made to measure blinds

 

Help and advice

Measuring up

The best way to get your curtains just right is to install your tracks or poles before you measure up for your curtains. Start off by looking at your window to decide where you want your curtains to go. If the window sits in a recess, decide if you want the curtains hanging inside or outside of it. If you're putting your curtains in front or, if your window sits flush to the wall, place your poles and tracks 15cm above the window and extend by 15-20cm either side - this will make space for your curtains to be drawn back. If you're planning to have very full curtains, leave a few centimetres more to allow maximum light into your room.

Your blind

If your window is set into a recess, it needs to be 7.5cm deep in order to fit the headrail.
Double-check how much space any window handles and hooks need and measure for the bind in front of them.

Measure both the width and the length of space to get the right dimensions. Remember to take measurements at different points and use centimetres if possible to ensure accuracy. If you prefer to hang your blind in front of the recess, position it as far above as you choose, then measure the inside of the recess crosswise and add a minimum of up to 4.5cm to each side.